EM-02 Properties:
2 mPa·s viscosity
Very Thin adhesive
0.002” gap filling capability
Instant cure
 
20 month shelf life
The EM-02 is a wicking type adhesive. This watery-thin adhesive infiltrates hairline fractures, pores, and narrow slots filling any empty voids. The EM-02 is well suited for porous and fragile material such as soft wood (balsa), ceramics, unpolished rocks and minerals, and fossil bones. For inlay applications, it penetrates and stabilizes the material through capillary action. The EM-02 will immediately soak into a soft, porous object until it is fully saturated with the CA. In such instances, it is advised to use an accelerator to create an instant reaction so full saturation of the object is unnecessary. It is often used as a finish by applying several coats, sanding, and then polishing to a high gloss.
Available in 1 ounce, 2 ounce, 16 ounce, and 44 lb. (20 kg)
Double click here to edit text
EM-40 Properties:
40 mPa·s viscosity
Medium Thin adhesive
0.004” gap filling capability
Instant cure

The EM-40 is a finishing adhesive. It is an easier glue to handle than the EM-02, making it an excellent substitute that is not as watery. This CA is thin enough to penetrate most fractures, joints, pores, and inlay material. The EM-40 will immediately soak into a soft, porous object until full saturation is achieved. In such instances, it is advised to use Starbond accelerator to create an instant reaction so full saturation of the object is unnecessary. It is often used as a finish by applying several coats, sanding, and then polishing to a high gloss.
Available in 2 ounce, 16 ounce, and 44 lb. (20 kg)
EM-150 Properties:
150 mPa·s viscosity
Medium adhesive
0.006” gap filling capability
Bonding time: 10-20 seconds

The EM-150 is a general-purpose adhesive that possesses an oil-like viscosity. It has certain properties of both the thin and thick, such as the ability to penetrate narrow slots, bond closely-fitted parts, and fill small gaps. Similar to the thinner CAs, the EM-150 is also used as a finish by applying several coats, sanding, and then polishing to a high gloss.
Available in 1 ounce, 2 ounce, 16 ounce, and 44 lb. (20 kg)
Used For:

•Repairing and filling cracks, inclusions, voids, and knots in wood
•High gloss finishes for a hard, clear, and waterproof coat
•Pen making
•Wicking into and stabilizing guitar
•Bonding balsa wood for model airplanes
•Metal and turquoise inlays
•Jewelry manufacturing and repair
•Furniture refinishing and antique repair
•Bonding fiberglass to a variety of material
•For fishing, bonding dumbbell eyes, larger streamers and big foam flies
d
Double click here to edit text
EM-2000 Properties:
2000 mPa·s viscosity
Thick adhesive
0.01 - 0.02” gap filling capability
Bonding time: > 60 seconds

The EM-2000 is known as the "gap filler" adhesive. Its high viscosity allows filling of large voids and gaps. Each drop of EM-2000 remains stationary even when applied on downward sloping surfaces. Curing time is extended to give users longer positioning time for more precise bonding. Depending on the working material, bonding time may exceed more than two minutes. In all such instances, Starbond Accelerator is recommended to speed up bonding time.
Available in 1 ounce, 2 ounce, 16 ounce, and 44 lb. (20 kg)
Used For:

•Quick repairs for auto paint and body.
•Filling large gaps and holes.
•Plastic and metal model assembly
•Forming unique finishes by carving, sanding, and feathering.
•Used to bond together various kayak panels. (Faster set time than epoxy)
•Used to install cue tips onto pool cues. (Starbond accelerator recommended)
•Bonding fiberglass to a variety of materials
•Coral fragging
•Shoe repairs
•Marble, Granite and Quartz repair
•Taxidermy
•Dental lab articulators

Double click here to edit text

(EM) Standard Clear CA

Used For:

•High gloss finishes for a hard, clear, and waterproof coat
•Repairing and filling cracks, inclusions, voids, and knots in wood
•Woodturning and knife handle finishes for a hard, clear, and waterproof coat
•Wicking into and stabilizing guitar frets
•Gluing and repairing guitar inlays on the headstock, body, and fretboard
•Fossil preparation through infiltration and stabilization of the fossil before extraction
•Repairing small cracks in stone
•Metal and turquoise inlays
•Jewelry manufacturing and repair
•Furniture refinishing and antique repair
•Bonding fiberglass to balsa wood
Double click here to edit text
EM-600 Properties:
600 mPa·s viscosity
Medium Thick adhesive
0.008” gap filling capability
Bonding time: 30-40 seconds

The EM-600 is ideal for bonding and repairing and possesses a syrup-like viscosity that gives users sustained control on each drop of glue applied. To provide longer positioning time for more precise bonding, the EM-600 is specially formulated to have an extended curing time. Depending on the working material, bonding time may reach up to one minute. In all such instances, Starbond Accelerator is recommended to speed up bonding time.
Available in 1 ounce, 2 ounce, 16 ounce, and 44 lb. (20 kg)
Used For:

•Bonding of harder wood (basswood and spruce), loosely fitted joints, hobby models
•Lapidary applications
•High gloss polish for stones and petrified wood
•Pen making
•Treating soft porous stones by creating a tough and non-porous exterior
•Bonding fiberglass to a variety of materials
•Marble, Granite and Quartz repair
Double click here to edit text
Used For:

•Screen printing, gluing screen mesh onto the frame
•Repairing and filling large cracks, inclusions, voids, and knots in wood
•Uneven surface bonding
•Bonding knife handles to blade, rubber R/C car tires to plastic/metal wheels
•Setting gemstones and preventing slippage
•Filling in and bonding cracked stones and slabs
•Filling voids, cracks, and bonding uneven surfaces
•Marble, granite and quartz repair
•Bonding fiberglass to a variety of materials
•Temporary auto bumper repair
Double click here to edit text