![5-Minute Flexible Toughened Epoxy [Pro Kit] — Quick Bonding, Repairs & Gap Filling](http://starbond.com/cdn/shop/files/5MinuteEpoxyProKit.png?v=1788295229&width=2250)
6:20Begin with the basics
A little know-how. A better bond.
Get familiar with CA glue, common uses, and the habits behind a controlled application.
Start lesson 1
Starbond Masterclass Learning Center
Skip to lessons and learning paths
6:20
01 02 03 04
6:20
1:28
0:55
0:54
1:44
42:49
1:05
9:46
2:16
3:08
6:05
1:47
0:39
1:04
1:59
1:25:35
44:26
5:05
6:38
3:01
01 / Fundamentals 02 / Woodworking 03 / Projects
PDF guide PDF guide PDF guide PDF guide
Starbond Masterclass
Work smarter, bond faster and stronger.
Choose the right glue, fix a problem, and finish your next project with confidence.
Free to watch · No sign-up required
Your first lesson · 6:20
Watch lesson CA glue basics
01 / Start here
Your first five lessons.
A practical introduction in 11 min 21 sec. Follow the sequence, then explore a technique for your project.
6:20Need help choosing a formula? Explore the full glue-selection masterclass or open the selection guide.
02 / Troubleshooting
Get back to your project.
Choose the issue you are working through for a focused lesson.
Glue will not bond
Check formula, fit, surface preparation, and glue amount.
View the fix 6:20Glue sets too slowly
Review temperature, glue amount, fit, and accelerator use.
View the fix 0:39My nozzle is clogged
See the cleaning workflow for a removable applicator nozzle.
View the fix 1:47I made a glue mistake
Choose a recovery approach for the cure state and surface.
View the fix 6:0503 / Lesson library
Find your next technique.
From a one-minute tip to a complete project. Choose what you need, at your own pace.
Showing all 20 lessons
6:20
CA glue basics
Understand the terminology, common uses, and habits behind a controlled CA-glue bond.
BeginnerWatch lesson
1:28
Set up your nozzle
Trim the applicator nozzle correctly while preserving enough length for precision microtips.
BeginnerWatch lesson
0:55
Apply glue with precision
Use a smaller amount and precision tips to place glue exactly where the repair needs it.
BeginnerWatch lesson
0:54
Better bonds with the R.A.P.I.D. method
Build five practical habits around preparation, glue amount, temperature, and cure control.
BeginnerWatch lesson
1:44
Store your glue correctly
Protect opened and unopened bottles from heat, moisture, and contamination.
BeginnerWatch lesson
42:49
Choose thin, medium, or thick CA glue
Understand how viscosity changes penetration, gap filling, working time, and application control.
BeginnerWatch lesson
1:05
Inside the Superglue Pro Kit
See the glue, spare nozzle, precision microtips, anti-clog pin cap, and quick-start guide.
BeginnerWatch lesson
9:46
CA glue for woodworking
Learn where CA glue fits into woodworking, from quick fixtures to practical repairs.
BeginnerWatch lesson
2:16
Fill deep wood voids
Build deeper repairs in controlled layers, accelerate exposed glue, level, and sand.
IntermediateWatch lesson
3:08
Make colored wood fills
Add mica pigment while controlling placement, layering, and the finished appearance.
IntermediateWatch lesson
6:05
Fix CA glue mistakes
Learn how to weaken a cured bond, reposition parts, and respond to accidental glue placement.
BeginnerWatch lesson
1:47
Unclog a glue nozzle
Use a practical cleaning workflow to dissolve cured CA glue from removable applicator nozzles.
BeginnerWatch lesson
0:39
How much accelerator to spray
Learn a controlled spray amount and why testing the material or finish first matters.
BeginnerWatch lesson
1:04
Pump or aerosol accelerator?
Compare pump delivery with aerosol mist so you can choose the format that fits the work area.
BeginnerWatch lesson
1:59
Remove superglue
Compare removal approaches and test sensitive surfaces before proceeding.
BeginnerWatch lesson
1:25:35
Repair a wobbly chair
Follow a detailed furniture-repair workflow for stabilizing loose chair joints.
AdvancedWatch lesson
44:26
Build a glue caddy
Build an organizer that keeps bottles upright, visible, and ready for efficient shop work.
IntermediateWatch lesson
5:05
Bond 3D-printed parts
See practical applications for assembling and repairing PLA, PETG, and TPU printed parts.
IntermediateWatch lesson
6:38
Create a high-gloss CA finish
Build, level, sand, and polish a CA finish on a suitable wood project.
IntermediateWatch lesson
3:01
5-minute epoxy repairs
See how 5-minute epoxy is used to fill gaps and repair damaged materials.
BeginnerWatch lesson
No lessons match those filters.
Try a different search or clear the filters to see every lesson.
Keep learning
A path for your next project.
Build on the basics with a more focused technique.
Start with confidence.
Five lessons covering the basics, bottle setup, application, bonding, and storage.
Start the 11-minute path →Fill, level, and finish.
Explore void repairs, colored fills, and a smooth CA finish.
Explore woodworking →Put your skills to work.
Chair repairs, shop organization, and assembling 3D-printed parts.
Explore projects →At your workbench
Keep a guide close by.
Download a reference or revisit a focused lesson while you work.
CA glue selection
Compare thin, medium, and thick formulas by penetration, fit, and control.
Open selection guide ↗Glue removal
Choose an approach for fresh, cured, or surface-sensitive mistakes.
Open removal guide ↗Starbond accelerator
Keep the accelerator reference handy while you plan your project.
Open accelerator guide ↗Pricing woodworking
A reference for pricing your woodworking projects.
Open pricing guide ↗A little help from Starbond
What are you bonding?
Tell us your material, glue, and project. Our team can help you find the next step.
