Black Friday starts now! Up to 20% off glue refills and accelerators.
Help Rewards
Illustrative EPS foam comparison: standard superglue damages foam while foam-safe glue leaves it intact, with red X and green check and Starbond Hobby & Craft Brush-On 10g blister packaging.
Starbond Hobby & Craft Brush-On glue applied precisely along a model airplane joint with its built-in brush.
Illustrative indoor scene of a father applying Starbond Hobby & Craft Brush-On glue while building a model airplane with his son.
Hands assembling a model airplane beside Starbond Hobby & Craft Brush-On glue. Sets in as fast as 10 seconds.
Brush-On Or Gel?: Brush-On (10g); Gel (3 × 5g).
23% OFF

Hobby & Craft Brush-On Super Glue — Specialty Foam-Safe, Low-Odor Formula for Models (10g)

Hobby & Craft Brush-On Super Glue — Specialty Foam-Safe, Low-Odor Formula for Models (10g)

$9.99
$13.00 $9.99
Format
  • Free shipping U.S. ground · orders $65+
  • Easy returns 30 days · used or unused
  • 6,000+ reviews Across the Starbond store

  • BRUSH-ON CONTROL FOR MODEL SEAMS AND SMALL PARTS
    The built-in brush places glue along narrow edges and detailed joints. Use it when spreading a small amount works better than a drop.
  • LOW-ODOR, FOAM-SAFE HOBBY FORMULA
    Made for suitable EPS, EPP and XPS craft foam, wood and balsa. Test the actual foam, surface coating and any accelerator first.
  • MEDIUM FLOW FOR CONTROLLED APPLICATION
    The motor-oil-like consistency flows from the brush into small seams. Fit the parts first and use only the amount the joint needs.
  • FOR PLASTIC MODELS AND FINISHED 3D PRINTS
    Use on suitable PLA, ABS or resin parts. Materials and finishes vary, so test a hidden area before a visible bond.
  • 10g BOTTLE WITH AN INTEGRATED BRUSH
    Keep the applicator with the glue instead of finding a separate tool. Follow the label for handling, ventilation and bottle care.
$9.99
$13.00 $9.99
Product Description

Brush glue along a tiny model seam without reaching for a separate applicator. Starbond Hobby & Craft Brush-On Super Glue puts a brush inside the cap of its 10g bottle. The medium, motor-oil-like flow spreads a controlled amount across small contact areas. Choose this brush on super glue for detailed edges, small wooden parts and balsa assemblies when a light coat works better than a drop. Its low-odor, foam-safe formula is made for suitable EPS, EPP and XPS craft foam.

Use it as model glue or miniature glue for compatible plastic and resin parts, or as glue for PLA and other suitable finished 3D prints, including ABS. This cyanoacrylate adhesive gives craft and model builders one integrated tool for spreading glue along a contact area. Fit the pieces, brush on a small amount and support them while the bond sets. Check unfamiliar paint, clear plastic and surface coatings before a visible repair. Any accelerator must also suit the project material. Choose Brush-On to coat a seam, or No-Drip Gel when angled or vertical parts need a glue that stays near its application point.

Product FAQs

What is the advantage of brush-on super glue?
The brush lets you spread a small amount along edges and seams without a separate applicator. It suits fine model joints and detailed parts with accessible contact surfaces.
Can Brush-On Super Glue be used on foam?
It is made for suitable EPS, EPP and XPS craft foam. Test the exact foam and any coating. Check an accelerator separately before using it on the project.
Can I brush this glue onto finished PLA or ABS parts?
Yes, for suitable printed parts. Test the material and finish first, prepare the contact surfaces and allow full cure after joining. It is not a printer-bed coating.
  • 5 stars: 8 (89%)
  • 4 stars: 1 (11%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
Some of the reviews shown are from related products the merchant grouped with this one.
T
Tom V. (Altoona, US)

Hobby & Craft Specialty No-Drip Super Glue Gel — Foam-Safe, Low-Odor Formula for Models (3 × 5g)

Tom V. review photo Tom V. review photo Tom V. review photo
D
David H. (New York, US)
Brush is the way to go!

I love this brush! I have more of a control when using this product on my craft items.

J
John Q.T.P.M.a.w. (Little Falls, US)
A MUST HAVE!!!

Great product to have. Great Starbond product to add onto my inventory of Starbond Ca glues!

j
jeffrey S.

Cool stuff.

j
jeffrey S.

Yeah just what i needed.

J
John G. (Wasilla, US)
Super Glue

Not so much on the glue but the people at Starbond are great, efficient and helpful.

C
CustomerStev (Lily, US)
Great for delicate parts

Especially useful for attaching small steam locomotive parts in HO. Great products!

E
Ed J. (White Bear Lake, US)
Gel for 3D Prints Works Well

I tried both the thin and gel version on a PLA 3D print assembly. The thins didn't really work - it soaked in too much. The gel did work great, especially combined with brush on accelerator. I'd like to see the gel version offered in larger bottles. I don't care for the metal tubes. Too messy and hard to keep the tip clear. Packaging aside, the product does work great.

G
Gary R.T. (Wilmington, US)
Excellent product

Easy to use works as described, does NOT melt foam board

Customer Service

Available from Monday - Friday (9am to 5pm PST)

Call Us

Contact our friendly and knowledgeable staff for quality support:

1-800-900-GLUE (4583)

Email Us

We've got you covered for any technical questions regarding products, shipping, payment:

support@starbond.com

Address

1450 W. 228th St. , Suite 11, Torrance, CA 90501