Super Fast Thin Super Glue (4 oz) + Aerosol Accelerator (6 oz) — Cures CA Glue Instantly for Tight Joints

Starbond Super Fast Thin Super glue EM-02 

Starbond Super Fast Thin Super glue EM-02 can’t be beat when it comes to getting into tight spaces on porous surfaces.  Whether you’re working with powder inlays, ceramics, soft wood, unpolished rocks, or even fossils, our Super Fast Thin Super glue penetrates and stabilizes any crack or seam effortlessly through wicking capillary action.  This watery-thin adhesive also makes a stunning super glue finish and polish, when applied as several coats, sanded in-between, and buffed to a brilliant shine. 

Want to keep the hold, but prevent absorption?  No problem – we have the perfect solution!  Starbond Accelerator keeps our glues from seeping into porous surfaces – the instant cure for unwanted wicking! 

Use Starbond Super Fast Thin Super glue EM-02 to:

• Repair and fill cracks, inclusions, voids, and knots in wood
• Stabilize Guitar Frets
• Install bindings and purflings on stringed instruments
• Glue and repair guitar inlays on the headstock, body, and fretboard
• Prepare fossils by infiltrating and stabilizing the fossil before extraction
• Repairing small cracks in stone
• Metal and turquoise inlays
• Create and repair jewelry
• Refinish furniture and antiques
• Repair ceramic, quartz, granite, and marble
• Bond fiberglass and balsa wood
• Finish woodturning and knife handles with a hard, clear, waterproof seal
• Perform taxidermy

For Use On:

• Wood
• Metal
• Rubber
• Leather
• Ceramics
• Gemstones
• Rocks & Minerals
• Carbon Fiber
• Most Plastic
• Fiberglass

Starbond Super Glue Aerosol Accelerator

Starbond Super Glue Aerosol Accelerator is used to significantly speed up the drying time of cyanoacrylate super glues.  Also known as a Super glue “activator”, this accelerant is solvent-based, and can be applied before and/or after the glue application.  Commonly paired with slower-drying, thicker viscosity adhesives and black Super glue, Starbond Super Glue Accelerator is also helpful when priming uneven surfaces.   It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time.  Our aerosol cans deliver a finely compressed mist and are perfect for the infrequent user, as the acetone in the product does not escape the bottle organically.  Also available as a pump spray, this accelerator cures Super glue in seconds – no more waiting!

Professional Tips:

• When using higher volumes of Super glue to fill gaps, bonding times may increase – use of Starbond Super Glue Accelerator is highly recommended.
• Starbond Super Glue Accelerator can also be used to enhance joint strength, when used to cure excess adhesive that results from joints being pressed together.
• Uniquely formulated to dry slightly slower than other similar products on the market, Starbond Super Glue Accelerator prevents “hazing” or whitening that may occur when super glues dry too fast.

Warning: This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer.  For more information, please visit: www.P65Warnings.ca.gov.