Starbond Super Glue Aerosol Accelerator is used to significantly speed up the drying time of cyanoacrylate super glues.  Also known as a CA glue “activator”, this accelerant is solvent-based, and can be applied before and/or after the glue application.  Commonly paired with slower-drying, thicker viscosity adhesives and black CA glue, Starbond Super Glue Accelerator is also helpful when priming uneven surfaces.   It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time. Our aerosol cans deliver a finely compressed mist and are perfect for the infrequent user, as the acetone in the product does not escape the bottle organically.  Also available as a pump spray, this accelerator cures super glue in seconds – no more waiting! Professional Tips: When using higher volumes of super glue to fill gaps, bonding times may increase – use of Starbond Super Glue Accelerator is highly recommended. Starbond Super Glue Accelerator can also be used to enhance joint strength, when used to cure excess adhesive that results from joints being pressed together. Uniquely formulated to dry slightly slower than other similar products on the market, Starbond Super Glue Accelerator prevents “hazing” or whitening that may occur when super glues dry too fast. Warning: This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer.  For more information, please visit: www.P65Warnings.ca.gov.

Read more less

Starbond Super Glue Pump Accelerator is ideal for users with frequent need for our Accelerator product.  Used to significantly speed up the drying time of cyanoacrylate super glues, our CA glue “activator”, is a solvent-based accelerant that can be applied before and/or after the glue application.  The removable pump further allows for less pressure behind the spray and easy access to the product itself, for those who wish a more precision application with smaller objects like a cotton swab or toothpick. Commonly paired with slower-drying, thicker viscosity adhesives and black CA glue, Starbond Super Glue Accelerator is also useful when priming uneven surfaces.   It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time.  Also available as an aerosol, this accelerator cures CA glue in seconds – no more waiting! Professional Tips: When using higher volumes of Super glue to fill gaps, bonding times may increase – use of Starbond Super Glue Accelerator is highly recommended. Starbond Super Glue Accelerator can also be used to enhance joint strength, when used to cure excess adhesive that results from joints being pressed together. Uniquely formulated to dry slightly slower than other similar products on the market, Starbond Super Glue Accelerator prevents “hazing” or whitening that may occur when super glues dry too fast. Warning: This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer.  For more information, please visit: www.P65Warnings.ca.gov.

Read more less

Precision Accelerator for Small, Delicate Work. Starbond® Brush-On Accelerator is perfect for accelerating super glue curing in small, delicate areas where traditional accelerators might cause overspray or mess. Ideal for hobbyists, model builders, and woodworkers, this brush-on formula gives you precise control, allowing for accurate application without the risk of drips or wasted product. Unlike traditional accelerators that may be too broad for intricate work, this brush applicator ensures a clean, controlled application exactly where it's needed. Speed up your CA super glue’s curing time to just seconds while maintaining precision. Plus, it comes with a spare brush, ensuring consistent performance, even after repeated use. Warning: Contains heptane and is flammable; use with adequate ventilation and keep away from heat, sparks, and open flame.

Read more less

Starbond Super Glue Remover  Say goodbye to sticky situations with our Starbond Superglue Remover, formerly known as CA Glue Debonder. With this essential tool in your kit, you’ll never have to worry about gluing your fingers together again. Whether you need to clean up spills or remove dried glue, our improved formula and design make it a breeze. What’s New? 🫶 More Effective at Glue Removal: Our extensive research and development efforts have resulted in an optimized formula that’s not only better than ever but also gentle on your skin. ⏱️ Thicker Viscosity Compared to Competitors: Unlike other products that tend to evaporate quickly or partially remove the glue, our formula is thicker, allowing it to stay on surfaces longer for effective glue removal. 📈 Aluminum Bottle + Longer Applicator Brush: We’ve upgraded the bottle to an aluminum design, sealing the liquid inside to prevent premature evaporation. The longer applicator brush ensures a full-reaching brush, reducing product waste. Remember to spot test delicate surfaces before using Superglue Remover, and always follow safety precautions when working with any CA/ super glue. Keep your workspace clean, and keep Starbond Superglue Remover handy for easy, worry-free glue removal.

Read more less