Starbond Super Glue Pump Accelerator is ideal for users with frequent need for our Accelerator product.  Used to significantly speed up the drying time of cyanoacrylate super glues, our CA glue “activator”, is a solvent-based accelerant that can be applied before and/or after the glue application.  The removable pump further allows for less pressure behind the spray and easy access to the product itself, for those who wish a more precision application with smaller objects like a cotton swab or toothpick. Commonly paired with slower-drying, thicker viscosity adhesives and black CA glue, Starbond Super Glue Accelerator is also useful when priming uneven surfaces.   It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time.  Also available as an aerosol, this accelerator cures CA glue in seconds – no more waiting! Professional Tips: When using higher volumes of Super glue to fill gaps, bonding times may increase – use of Starbond Super Glue Accelerator is highly recommended. Starbond Super Glue Accelerator can also be used to enhance joint strength, when used to cure excess adhesive that results from joints being pressed together. Uniquely formulated to dry slightly slower than other similar products on the market, Starbond Super Glue Accelerator prevents “hazing” or whitening that may occur when super glues dry too fast. Warning: This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer.  For more information, please visit: www.P65Warnings.ca.gov.

Read more less

Starbond Super Glue Aerosol Accelerator is used to significantly speed up the drying time of cyanoacrylate super glues.  Also known as a CA glue “activator”, this accelerant is solvent-based, and can be applied before and/or after the glue application.  Commonly paired with slower-drying, thicker viscosity adhesives and black CA glue, Starbond Super Glue Accelerator is also helpful when priming uneven surfaces.   It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time. Our aerosol cans deliver a finely compressed mist and are perfect for the infrequent user, as the acetone in the product does not escape the bottle organically.  Also available as a pump spray, this accelerator cures super glue in seconds – no more waiting! Professional Tips: When using higher volumes of super glue to fill gaps, bonding times may increase – use of Starbond Super Glue Accelerator is highly recommended. Starbond Super Glue Accelerator can also be used to enhance joint strength, when used to cure excess adhesive that results from joints being pressed together. Uniquely formulated to dry slightly slower than other similar products on the market, Starbond Super Glue Accelerator prevents “hazing” or whitening that may occur when super glues dry too fast. Warning: This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer.  For more information, please visit: www.P65Warnings.ca.gov.

Read more less

All-in-One Super Glue Bundle with Instant Aerosol Activation. Bring all your bonding needs together with the ultimate adhesive bundle, designed for speed, precision, and versatility. Whether you’re looking for an ultra-fast adhesive for delicate projects or a gap-filling solution for tougher jobs, this collection has it all. Featuring "Super Fast" Thin, "Multi-Purpose" Medium, and "Gap Filler" Thick, paired with the Super Glue Aerosol Accelerator, this bundle gives you the perfect tools for every project. Let’s stick together and create something extraordinary with reliable adhesives trusted by professionals. Starbond® "Super Fast" Thin An ultra-fast drying (3-5 seconds), water-thin super glue perfect for precision bonding and stabilizing porous materials like wood, fossils, and precious stones. With a viscosity of 2-3 cps, it effortlessly wicks into tight spaces, creating strong bonds in seconds. Ideal for woodturning, lapidary, and guitar repairs, it provides a brilliant CA finish, secures inlays, and repairs cracks, voids, and knots. Perfect for hobbyists and professionals alike, its lightning-fast bonding on wood and high-energy plastics makes it a versatile and mess-free adhesive solution. Starbond® "Multi-Purpose" Medium A fast-drying (12-15 seconds), medium-viscosity superglue designed for strong, precise bonding across various applications. With a balanced drying time, it allows for quick repairs and detailed adjustments, making it ideal for woodturning, lapidary, and hobby modeling. This versatile adhesive creates a glass-like, UV-protective finish on wood, repairs cracks in stones and gems, and bonds 3D printed parts and delicate components with ease. Perfect for all-around use, it delivers fast results on wood, plastics, and other materials, offering a reliable solution for any project. Starbond® "Gap Filler" Thick A slower-drying (25 seconds), high-viscosity superglue designed for bonding uneven surfaces and filling large voids. With its thick, honey-like consistency (2000 cps), it flows naturally into gaps without dripping on angled surfaces, making it perfect for woodturning, pen making, and even glass or metal applications. This versatile adhesive provides extended working time for precise adjustments and bonds materials like wood, plastic, and metal. Ideal for repairs, model assembly, and creating unique finishes, it offers a cleaner, quicker alternative to epoxy without the need for clamping or waiting. Starbond® Super Glue Aerosol Accelerator Significantly speeds up the drying time of cyanoacrylate super glues. The aerosol delivers a finely compressed mist, ensuring smooth application and preventing "hazing" or whitening. Ideal for colder environments and harder-to-bond materials, Starbond® Aerosol Accelerator ensures precise, controlled curing, saving you time and effort. Professional Tips: Use with Starbond® "Super Fast" Thin to prevent seepage in porous materials. Ideal for accelerating Starbond® "Multi-Purpose" Medium for quicker bonding. Enhances gap-filling with Starbond® "Gap Filler" Thick by speeding up curing time.

Read more less

Black Medium-Thick + Aerosol Accelerator. Starbond® Black Medium-Thick Super Glue is a rubber-strengthened adhesive designed for larger repairs and bold accents. This jet-black glue offers exceptional flexibility and impact resistance, making it ideal for heavy-duty bonding and creative projects. Its medium-thick viscosity ensures precise application for filling wider voids and cracks without excessive flow, delivering a strong, seamless bond every time. Perfect for reconing speakers, securing R/C car tires, or accenting spalted wood, this versatile adhesive can also be sanded and polished to a high-gloss finish. Its durable, flexible nature prevents cracking even in malleable environments, ensuring long-lasting results. Used For: Adding black accent designs on spalted wood and dark surfaces. Bonding a variety of materials, including wood, metal, glass, rubber, and more. Repairing and filling larger cracks, voids, and knots in woodworking projects. Securing R/C car tires and locking threads. Speaker manufacturing: bonding top plates, cones, gaskets, and other components. Polishing projects to a high-gloss, durable finish. Starbond® Super Glue Aerosol Accelerator is used to significantly speed up the drying time of cyanoacrylate super glues.  Also known as a CA glue “activator”, this accelerant is solvent-based, and can be applied before and/or after the glue application.  Commonly paired with slower-drying, thicker viscosity adhesives and black CA glue, It is also helpful when priming uneven surfaces.   It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time. Our aerosol cans deliver a finely compressed mist and are perfect for the infrequent user, as the acetone in the product does not escape the bottle organically.  Also available as a pump spray, this accelerator cures super glue in seconds – no more waiting! Used to cure the CA that flows from joints that are being pressed together, greatly enhancing the joints strength When using higher volumes of CA during gap filling applications, bonding time may take much longer, so Accelerator is highly recommended WARNING This product can expose you to chemicals including N,N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Read more less

    Starbond EM-02 Super Fast Thin Super glue Starbond EM-02 Super Fast Thin Super glue is a "wicking type" ethyl cyanoacrylate super glue. This watery-thin, instant adhesive is commonly used to repair cracks and hairline fractures because of its ability to easily penetrate narrow spaces. Starbond Super Fast Thin Super glue is well suited for strengthening porous, fragile material such as soft wood (balsa), ceramics, unpolished rocks and minerals, and fossil bones. During inlay applications such as turquoise inlays or metal powder inlays, the thin viscosity Super glue penetrates and stabilizes the powder through capillary action. Thin Super glues are often used as a finish by applying several coats, sanding, and then polishing to a high gloss. Use of Starbond Accelerator is advised when saturation of a porous object is unwanted. The instant cure will prevent Starbond EM-02 Super Fast Thin Super glue from excessively soaking into the porous object, and prevent waste. Starbond EM-150 Medium Super glue Starbond EM-150 Medium Super glue is a "multi-purpose" ethyl cyanoacrylate super glue that possesses an oil-like viscosity. This means that the medium viscosity instant adhesive has properties of both the thin super glue and thick super glue. Starbond EM-150 Medium Super glue is able to penetrate narrow slots, bond closely-fitted parts, fill small gaps, and create high gloss wooden finishes. Similar to the thinner super glues, the medium Super glue is also used as a finish by applying several coats, sanding, and then polishing to a high gloss.Starbond EM-150 Medium super glue is used in hobby as tire glue, pen turning for gluing pen blanks, woodturning for wood repairs, and in quick home repairs. Starbond EM-2000 Thick Super glue Starbond EM-2000 Thick Super glue is an ethyl cyanoacrylate super glue known as the "gap filler". This thick super glue adhesive has a high viscosity that gives it strong bonding capabilities and allows easy filling of large voids and gaps. Each drop of Starbond EM-2000 Thick Super glue remains stationary even when applied on downward sloping surfaces. The Starbond EM-2000 Thick Super glue is specially formulated to have an extended curing time to lengthen positioning time for more precise bonding. Depending on the working material, bonding time may exceed more than two minutes. In all such instances, Starbond Accelerator is recommended to speed up bonding time. Starbond Super Glue Accelerator Starbond Super Glue Accelerator, also known as Super glue "activator," is used to significantly speed up the drying time of cyanoacrylate super glues. The Super glue accelerator is a solvent based product that can be applied before and/or after Super glue application. Starbond Super Glue Accelerator is commonly paired with thicker viscosity Super glues and black Super glue, as these adhesives take longer to dry. In addition, Starbond Super Glue Accelerator is useful when priming uneven surfaces or material combinations that are harder to bond, and in colder, drier environments where curing time may be delayed. Starbond Super Glue Accelerator comes in pump sprayer and aerosol form. WARNING This product can expose you to chemicals including N,N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.  

Read more less

2 oz. Starbond “Dark Brown” Medium-Thick + 6 oz. Aerosol Accelerator Bundle Starbond BR-500 Brown Medium-Thick Super glue is for general-purpose use and so much more!  With its “coffee brown” color, there is no need to introduce sawdust and coloring agents to your other Super glues when filling voids! Our BR-500 super glue is the ideal adhesive for bonding close-fitting parts, filling bug holes and knots, and concealing imperfections in wood. We also recommend pairing this glue to highlight and contrast light-colored woods, for perfect inlays, crack repairs, and sanding to a high-polish finish.   Use Starbond BR-500 Brown Medium-Thick Super glue to: Conceal minor imperfections in darker wood such as walnut. Fill cracks, inclusions, voids, and knots in wood Glue and repair in general applications  For Use On: Wood Metal Rubber Leather Ceramics Gemstones Rocks & Minerals Carbon Fiber Fiberglass Most Plastics  

Read more less

Starbond EM-150 Medium Super glue  Starbond EM-150 Medium Super glue is a medium-viscosity, multi-purpose, instant adhesive.  With an oil-like consistency, this glue has properties of both our thin super glue and thick super glue products, making it ideal for filling small gaps, penetrating narrow slots, bonding close-fitting parts, and creating high-gloss finishes on wood.  This super glue wood finishing is accomplished by applying multiple coats, sanding, then polishing to a high shine!  This versatile adhesive is used in woodturning, guitar repair, and pen making, to name but a few applications.  Used by everyone from lapidaries to taxidermists, this glue should be kept on hand for all your small household repairs! Professional Tip: When bonding two smooth surfaces, be sure to lightly sand, or otherwise make them scuffed or more abrasive – the glue will have more surface area to adhere to, and therefore more holding strength! Use Starbond EM-150 Medium Super glue to: Bond harder wood, like basswood and spruce Treat cracked stones and gems Bond loosely fitted soft woods and balsa joints Build hobby models such as planes, cars, and boats Bond RC car tires Place and repair car trim and molding Make pens and turn wood Form a high-gloss polish on stones and petrified wood Bond fiberglass to a variety of materials Repair marble, granite, and quartz Glue and repair guitar inlays on the body, headstock and fretboard Work with taxidermy For Use On: Wood Metal Rubber Leather Ceramics Gemstones Rocks & Minerals Carbon fiber Fiberglass PVC & Most Plastics Starbond Super Glue Aerosol Accelerator Starbond Super Glue Aerosol Accelerator is used to significantly speed up the drying time of cyanoacrylate super glues.  Also known as a Super glue “activator”, this accelerant is solvent-based, and can be applied before and/or after the glue application.  Commonly paired with slower-drying, thicker viscosity adhesives and black Super glue, Starbond Super Glue Accelerator is also helpful when priming uneven surfaces.   It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time.  Our aerosol cans deliver a finely compressed mist and are perfect for the infrequent user, as the acetone in the product does not escape the bottle organically.  Also available as a pump spray, this accelerator cures Super glue in seconds – no more waiting! Professional Tips: When using higher volumes of Super glue to fill gaps, bonding times may increase – use of Starbond Super Glue Accelerator is highly recommended. Starbond Super Glue Accelerator can also be used to enhance joint strength, when used to cure excess adhesive that results from joints being pressed together. Uniquely formulated to dry slightly slower than other similar products on the market, Starbond Super Glue Accelerator prevents “hazing” or whitening that may occur when super glues dry too fast. Warning: This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer.  For more information, please visit: www.P65Warnings.ca.gov.    

Read more less

All-in-One Super Glue Bundle with Pump Controlled Precision Curing. Bring all your bonding needs together with the ultimate adhesive bundle, designed for speed, precision, and versatility. Whether you’re looking for an ultra-fast adhesive for delicate projects or a gap-filling solution for tougher jobs, this collection has it all. Featuring "Super Fast" Thin, "Multi-Purpose" Medium, and "Gap Filler" Thick, paired with the Super Glue Pump Accelerator, this bundle gives you the perfect tools for every project. Let’s stick together and create something extraordinary with reliable adhesives trusted by professionals. Starbond® "Super Fast" Thin An ultra-fast drying (3-5 seconds), water-thin super glue perfect for precision bonding and stabilizing porous materials like wood, fossils, and precious stones. With a viscosity of 2-3 cps, it effortlessly wicks into tight spaces, creating strong bonds in seconds. Ideal for woodturning, lapidary, and guitar repairs, it provides a brilliant CA finish, secures inlays, and repairs cracks, voids, and knots. Perfect for hobbyists and professionals alike, its lightning-fast bonding on wood and high-energy plastics makes it a versatile and mess-free adhesive solution. Starbond® "Multi-Purpose" Medium A fast-drying (12-15 seconds), medium-viscosity superglue designed for strong, precise bonding across various applications. With a balanced drying time, it allows for quick repairs and detailed adjustments, making it ideal for woodturning, lapidary, and hobby modeling. This versatile adhesive creates a glass-like, UV-protective finish on wood, repairs cracks in stones and gems, and bonds 3D printed parts and delicate components with ease. Perfect for all-around use, it delivers fast results on wood, plastics, and other materials, offering a reliable solution for any project. Starbond® "Gap Filler" Thick A slower-drying (25 seconds), high-viscosity superglue designed for bonding uneven surfaces and filling large voids. With its thick, honey-like consistency (2000 cps), it flows naturally into gaps without dripping on angled surfaces, making it perfect for woodturning, pen making, and even glass or metal applications. This versatile adhesive provides extended working time for precise adjustments and bonds materials like wood, plastic, and metal. Ideal for repairs, model assembly, and creating unique finishes, it offers a cleaner, quicker alternative to epoxy without the need for clamping or waiting. Starbond® Super Glue Pump Accelerator Significantly speeds up the drying time of cyanoacrylate super glues. The pump delivers a controlled, targeted application, reducing mess and ensuring precision. Perfect for detailed projects and hard-to-bond surfaces, the pump format gives you the accuracy needed for clean, effective curing without "hazing" or whitening. Professional Tips: Use with Starbond® "Super Fast" Thin to prevent seepage in porous materials. Ideal for accelerating Starbond® "Multi-Purpose" Medium for quicker bonding. Enhances gap-filling with Starbond® "Gap Filler" Thick by speeding up curing time.

Read more less

  Starbond Super Fast Thin Super glue EM-02  Starbond Super Fast Thin Super glue EM-02 can’t be beat when it comes to getting into tight spaces on porous surfaces.  Whether you’re working with powder inlays, ceramics, soft wood, unpolished rocks, or even fossils, our Super Fast Thin Super glue penetrates and stabilizes any crack or seam effortlessly through wicking capillary action.  This watery-thin adhesive also makes a stunning super glue finish and polish, when applied as several coats, sanded in-between, and buffed to a brilliant shine.  Want to keep the hold, but prevent absorption?  No problem – we have the perfect solution!  Starbond Accelerator keeps our glues from seeping into porous surfaces – the instant cure for unwanted wicking!  Use Starbond Super Fast Thin Super glue EM-02 to: Repair and fill cracks, inclusions, voids, and knots in wood Stabilize Guitar Frets Install bindings and purflings on stringed instruments Glue and repair guitar inlays on the headstock, body, and fretboard Prepare fossils by infiltrating and stabilizing the fossil before extraction Repairing small cracks in stone Metal and turquoise inlays Create and repair jewelry Refinish furniture and antiques Repair ceramic, quartz, granite, and marble Bond fiberglass and balsa wood Finish woodturning and knife handles with a hard, clear, waterproof seal Perform taxidermy For Use On: Wood Metal Rubber Leather Ceramics Gemstones Rocks & Minerals Carbon Fiber Most Plastic Fiberglass Starbond Super Glue Aerosol Accelerator Starbond Super Glue Aerosol Accelerator is used to significantly speed up the drying time of cyanoacrylate super glues.  Also known as a Super glue “activator”, this accelerant is solvent-based, and can be applied before and/or after the glue application.  Commonly paired with slower-drying, thicker viscosity adhesives and black Super glue, Starbond Super Glue Accelerator is also helpful when priming uneven surfaces.   It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time.  Our aerosol cans deliver a finely compressed mist and are perfect for the infrequent user, as the acetone in the product does not escape the bottle organically.  Also available as a pump spray, this accelerator cures Super glue in seconds – no more waiting! Professional Tips: When using higher volumes of Super glue to fill gaps, bonding times may increase – use of Starbond Super Glue Accelerator is highly recommended. Starbond Super Glue Accelerator can also be used to enhance joint strength, when used to cure excess adhesive that results from joints being pressed together. Uniquely formulated to dry slightly slower than other similar products on the market, Starbond Super Glue Accelerator prevents “hazing” or whitening that may occur when super glues dry too fast. Warning: This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer.  For more information, please visit: www.P65Warnings.ca.gov.  

Read more less

Precision Accelerator for Small, Delicate Work. Starbond® Brush-On Accelerator is perfect for accelerating super glue curing in small, delicate areas where traditional accelerators might cause overspray or mess. Ideal for hobbyists, model builders, and woodworkers, this brush-on formula gives you precise control, allowing for accurate application without the risk of drips or wasted product. Unlike traditional accelerators that may be too broad for intricate work, this brush applicator ensures a clean, controlled application exactly where it's needed. Speed up your CA super glue’s curing time to just seconds while maintaining precision. Plus, it comes with a spare brush, ensuring consistent performance, even after repeated use. Warning: Contains heptane and is flammable; use with adequate ventilation and keep away from heat, sparks, and open flame.

Read more less

Starbond EM-2000 Thick Super Glue is known as the “gap filler’.  This thick adhesive has a thick viscosity, making it the go-to glue for filling large voids and gaps, and heavy-duty bonding.  With its strong bonding capabilities, EM-2000 stays in place, even when applied at an angle.  This glue is specially formulated to have a longer curing time, allowing as much as two minutes for positioning and the most precise bonding. The Twist-off nozzle bottle The twist-off nozzle bottle is specially designed to allow faster dispensing of Starbond Thick super glue while still maintaining great precision. It also eliminates the need to cut the tip of the applicator nozzle before first use. So if you’re looking to get your craft on and need precision with your glue application, reach for the Starbond Thick super glue with the screw-off nozzle. But if you’re looking for a little bit more precision, a cylindrical bottle will do the trick (since it is compatible with Starbond microtips)! Starbond Accelerator is perfect if you need the high degree of control from our EM-2000, but want to speed up the bonding time! Use Starbond EM-2000 Thick Super Glue to: Quickly repair auto body and paint Fill large gaps and holes Assemble plastic and metal models Form unique finishes by carving, sanding, and feathering Bond various kayak panels faster than with epoxy Install cue tips onto pool cues (with recommended Starbond Accelerator) Bond fiberglass to a variety of materials Frag coral Repair shoes Repair marble, granite, and quartz Perform taxidermy Bond models to dental lab articulators Temporarily repair auto bumpers For use on: Wood Metal Rubber Leather Ceramics Gemstones Rocks & Minerals Carbon Fiber Fiberglass PVC & Most Plastics Starbond Super Glue Aerosol Accelerator   Starbond Super Glue Aerosol Accelerator is used to significantly speed up the drying time of cyanoacrylate super glues.  Also known as a super glue “activator”, this accelerant is solvent-based, and can be applied before and/or after the glue application.  Commonly paired with slower-drying, thicker viscosity adhesives and black super glue, Starbond Super Glue Accelerator is also helpful when priming uneven surfaces.   It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time.  Our aerosol cans deliver a finely compressed mist and are perfect for the infrequent user, as the acetone in the product does not escape the bottle organically.  Also available as a pump spray, this accelerator cures super glue in seconds – no more waiting! Professional Tips: When using higher volumes of super glue to fill gaps, bonding times may increase – use of Starbond Super Glue Accelerator is highly recommended. Starbond Super Glue Accelerator can also be used to enhance joint strength, when used to cure excess adhesive that results from joints being pressed together. Uniquely formulated to dry slightly slower than other similar products on the market, Starbond Super Glue Accelerator prevents “hazing” or whitening that may occur when super glues dry too fast. Warning: This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer.  For more information, please visit: www.P65Warnings.ca.gov.

Read more less