Countertop Repair with Starbond White Medium-Thick CA Glue

Sometimes when working around your house or workshop, things may just fall apart and you end up with that annoying crack on your beautiful marble/granite countertop.

Our DW-500 Starbond White Heavy Medium CA Glue (Medium Thick) has got you covered!

The DW-500 is a special formula that creates an opaque white bond, and is a slow-flowing CA glue, with typical bonding times of 40-60 seconds. It can take much longer than usual to dry when large amounts of the adhesive are applied. We therefore recommend our Starbond Accelerator to reduce the bonding and drying times.

Stay in the Loop: Subscribe for Daily Tips, Tricks, and Deals!

Join Our Community and Never Miss Out on Exclusive Offers!

Your privacyis important to us

How to mix CA Glues with Mica Powders?

Performance & Safety with Starbond's Superglue Remover

Improvements in our Applicator Nozzles

Improved Over the Years: The 6 Oz. Accelerator

Starbond's 3 Superglue Accelerators: Which one's for you?

Starbond's Top 3 Options for Matching Wood Colors!

Bonding Smooth Surfaces using Cyanoacrylate Glue or Super Glue

How to use CA Glue as a Wood Finish

Works Great filling dents and dings in gunstocks

I used this to fill deep scratches, dents and dings in a gunstock. It really worked great! Easiest method I've found so far.

Sanding is fun again

The Z9 sanding disks are extremely durable and work great at removing material and creating a smooth finish. Give it a try and you won’t be disappointed. And the price is great as well.

Starbond Thin and Fast

I bought this to finish pens. It works very welll. I usually put at least 16 coats for a hard durable finish. I can recommend for anyone finishing pens, grinders

Great putty

This worked great to fill in some edge chips on a dark granite countertop. I also used it to fill nail holes on antique slate roof tiles so I could engrave them and sell at a craft fair.

Great glue for pen segmenting.

I also like the way the cap fits the bottle.

thick gap filler for hardwood bench

Used thick gap filler (without accelerator) to fill cracks in a tropical rain forest hard wood bench (repurposed rail-road ties). The thick fillers small nozzle was very effective to prevent excess filler on the piece. The thick filler took several subsequent applications to fill the gaps but was "thin" enough to flow into the cracks. I believe the amount flowing into the gaps is much better than an epoxy like west system would have achieved and certainly without a high amount of excess epoxy being applied on the piece.

Very good sanding disks

I used these disks on a project that was comprised of 6 exotic woods and they performed very well!

Good stuff

Use the sanding discs on a guitar stand.