Woodturning CA Finish On The Lathe
![Woodturning CA Finish On The Lathe](articles/81d5cf0d452fbdb6e04db142548ec0fa_6e921670-d050-4f1f-a28f-b41d666a3cc3_500x_1.png)
Today's product that I'll be showing you is the Starbond Super Fast Thin EM-02. You can use this glue for a neat little trick on making lathe applied finish.
Today's product that I'll be showing you is the Starbond Super Fast Thin EM-02. You can use this glue for a neat little trick on making lathe applied finish. It works beautifully. I have here a couple of beads that have been sanded up. Apply a small amount of glue for the first coat. Simply rub on it using a cloth to cover the surface. Apply subsequent coats with the lathe turned on. You have be a little bit fast on applying as the glue dries quickly. Continue to rub the glue on the surface until you see a high-gloss finish. As you can see, we have a perfect smooth finish in seconds. There you have it. I hope this article was helpful.
Comments
-
How do you keep it from sticking to your fingers or burning through your rag?
![](https://starbond.com/cdn/shop/files/starbond-logo_a39184be-da28-48d5-abf5-171fb5c9e535.png)
Stay in the Loop: Subscribe for Daily Tips, Tricks, and Deals!
Join Our Community and Never Miss Out on Exclusive Offers!
Your privacyis important to us