One or more of the items in your cart is a recurring or deferred purchase. By continuing, I agree to the cancellation policy and authorize you to charge my payment method at the prices, frequency and dates listed on this page until my order is fulfilled or I cancel, if permitted.
Starbond Super Glue Pump Accelerator is ideal for users with frequent need for our Accelerator product. Used to significantly speed up the drying time of cyanoacrylate super glues, our CA glue “activator”, is a solvent-based accelerant that can be applied before and/or after the glue application.
The removable pump further allows for less pressure behind the spray and easy access to the product itself, for those who wish a more precision application with smaller objects like a cotton swab or toothpick. Commonly paired with slower-drying, thicker viscosity adhesives and black CA glue, Starbond Super Glue Accelerator is also useful when priming uneven surfaces. It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time. Also available as an aerosol, this accelerator cures CA glue in seconds – no more waiting!
Professional Tips:
When using higher volumes of Super glue to fill gaps, bonding times may increase – use of Starbond Super Glue Accelerator is highly recommended.
Starbond Super Glue Accelerator can also be used to enhance joint strength, when used to cure excess adhesive that results from joints being pressed together.
Uniquely formulated to dry slightly slower than other similar products on the market, Starbond Super Glue Accelerator prevents “hazing” or whitening that may occur when super glues dry too fast.
Warning: This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer. For more information, please visit: www.P65Warnings.ca.gov.
Starbond Super Glue Aerosol Accelerator is used to significantly speed up the drying time of cyanoacrylate super glues. Also known as a CA glue “activator”, this accelerant is solvent-based, and can be applied before and/or after the glue application. Commonly paired with slower-drying, thicker viscosity adhesives and black CA glue, Starbond Super Glue Accelerator is also helpful when priming uneven surfaces. It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time.
Our aerosol cans deliver a finely compressed mist and are perfect for the infrequent user, as the acetone in the product does not escape the bottle organically. Also available as a pump spray, this accelerator cures super glue in seconds – no more waiting!
Professional Tips:
When using higher volumes of super glue to fill gaps, bonding times may increase – use of Starbond Super Glue Accelerator is highly recommended.
Starbond Super Glue Accelerator can also be used to enhance joint strength, when used to cure excess adhesive that results from joints being pressed together.
Uniquely formulated to dry slightly slower than other similar products on the market, Starbond Super Glue Accelerator prevents “hazing” or whitening that may occur when super glues dry too fast.
Warning: This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer. For more information, please visit: www.P65Warnings.ca.gov.
All-in-One Super Glue Bundle with Instant Aerosol Activation.
Bring all your bonding needs together with the ultimate adhesive bundle, designed for speed, precision, and versatility. Whether you’re looking for an ultra-fast adhesive for delicate projects or a gap-filling solution for tougher jobs, this collection has it all. Featuring "Super Fast" Thin, "Multi-Purpose" Medium, and "Gap Filler" Thick, paired with the Super Glue Aerosol Accelerator, this bundle gives you the perfect tools for every project. Let’s stick together and create something extraordinary with reliable adhesives trusted by professionals.
Starbond® "Super Fast" Thin
An ultra-fast drying (3-5 seconds), water-thin super glue perfect for precision bonding and stabilizing porous materials like wood, fossils, and precious stones. With a viscosity of 2-3 cps, it effortlessly wicks into tight spaces, creating strong bonds in seconds. Ideal for woodturning, lapidary, and guitar repairs, it provides a brilliant CA finish, secures inlays, and repairs cracks, voids, and knots. Perfect for hobbyists and professionals alike, its lightning-fast bonding on wood and high-energy plastics makes it a versatile and mess-free adhesive solution.
Starbond® "Multi-Purpose" Medium
A fast-drying (12-15 seconds), medium-viscosity superglue designed for strong, precise bonding across various applications. With a balanced drying time, it allows for quick repairs and detailed adjustments, making it ideal for woodturning, lapidary, and hobby modeling. This versatile adhesive creates a glass-like, UV-protective finish on wood, repairs cracks in stones and gems, and bonds 3D printed parts and delicate components with ease. Perfect for all-around use, it delivers fast results on wood, plastics, and other materials, offering a reliable solution for any project.
Starbond® "Gap Filler" Thick
A slower-drying (25 seconds), high-viscosity superglue designed for bonding uneven surfaces and filling large voids. With its thick, honey-like consistency (2000 cps), it flows naturally into gaps without dripping on angled surfaces, making it perfect for woodturning, pen making, and even glass or metal applications. This versatile adhesive provides extended working time for precise adjustments and bonds materials like wood, plastic, and metal. Ideal for repairs, model assembly, and creating unique finishes, it offers a cleaner, quicker alternative to epoxy without the need for clamping or waiting.
Starbond® Super Glue Aerosol Accelerator
Significantly speeds up the drying time of cyanoacrylate super glues. The aerosol delivers a finely compressed mist, ensuring smooth application and preventing "hazing" or whitening. Ideal for colder environments and harder-to-bond materials, Starbond® Aerosol Accelerator ensures precise, controlled curing, saving you time and effort.
Professional Tips:
Use with Starbond® "Super Fast" Thin to prevent seepage in porous materials.
Ideal for accelerating Starbond® "Multi-Purpose" Medium for quicker bonding.
Enhances gap-filling with Starbond® "Gap Filler" Thick by speeding up curing time.
Black Medium-Thick + Aerosol Accelerator.
Starbond® Black Medium-Thick Super Glue is a rubber-strengthened adhesive designed for larger repairs and bold accents. This jet-black glue offers exceptional flexibility and impact resistance, making it ideal for heavy-duty bonding and creative projects. Its medium-thick viscosity ensures precise application for filling wider voids and cracks without excessive flow, delivering a strong, seamless bond every time.
Perfect for reconing speakers, securing R/C car tires, or accenting spalted wood, this versatile adhesive can also be sanded and polished to a high-gloss finish. Its durable, flexible nature prevents cracking even in malleable environments, ensuring long-lasting results.
Used For:
Adding black accent designs on spalted wood and dark surfaces.
Bonding a variety of materials, including wood, metal, glass, rubber, and more.
Repairing and filling larger cracks, voids, and knots in woodworking projects.
Securing R/C car tires and locking threads.
Speaker manufacturing: bonding top plates, cones, gaskets, and other components.
Polishing projects to a high-gloss, durable finish.
Starbond® Super Glue Aerosol Accelerator is used to significantly speed up the drying time of cyanoacrylate super glues. Also known as a CA glue “activator”, this accelerant is solvent-based, and can be applied before and/or after the glue application. Commonly paired with slower-drying, thicker viscosity adhesives and black CA glue, It is also helpful when priming uneven surfaces. It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time.
Our aerosol cans deliver a finely compressed mist and are perfect for the infrequent user, as the acetone in the product does not escape the bottle organically. Also available as a pump spray, this accelerator cures super glue in seconds – no more waiting!
Used to cure the CA that flows from joints that are being pressed together, greatly enhancing the joints strength
When using higher volumes of CA during gap filling applications, bonding time may take much longer, so Accelerator is highly recommended
WARNING This product can expose you to chemicals including N,N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
2 oz. Starbond “Dark Brown” Medium-Thick + 6 oz. Aerosol Accelerator Bundle
Starbond BR-500 Brown Medium-Thick Super glue is for general-purpose use and so much more! With its “coffee brown” color, there is no need to introduce sawdust and coloring agents to your other Super glues when filling voids! Our BR-500 super glue is the ideal adhesive for bonding close-fitting parts, filling bug holes and knots, and concealing imperfections in wood. We also recommend pairing this glue to highlight and contrast light-colored woods, for perfect inlays, crack repairs, and sanding to a high-polish finish.
Use Starbond BR-500 Brown Medium-Thick Super glue to:
Conceal minor imperfections in darker wood such as walnut.
Fill cracks, inclusions, voids, and knots in wood
Glue and repair in general applications
For Use On:
Wood
Metal
Rubber
Leather
Ceramics
Gemstones
Rocks & Minerals
Carbon Fiber
Fiberglass
Most Plastics
2 oz. Brown Medium Super Glue + 6 oz. Aerosol Accelerator Bundle
Starbond BR-150 Brown Medium Super Glue is a brown-tinted super glue for general-purpose use and so much more! With its light amber color, there is no need to introduce sawdust to your other super glues when filling voids! This adhesive penetrates narrow slots, bonds close-fitting parts, and fills small gaps. We recommend pairing this glue with light-colored woods, for perfect inlays, crack repairs, and sanding to a high-polish finish.
Use Starbond BR-150 Brown Medium Super Glue to:
Accent designs on spalted wood
Blend into similarly colored surfaces
Repair and fill cracks, inclusions, voids, and knots in wood
Glue and repair guitar inlays on the headstock, body, and fretboard
For Use On:
Wood
Metal
Rubber
Leather
Ceramics
Gemstones
Rocks & Minerals
Carbon Fiber
Fiberglass
Most Plastics
Starbond EM-150 Medium Super glue
Starbond EM-150 Medium Super glue is a medium-viscosity, multi-purpose, instant adhesive. With an oil-like consistency, this glue has properties of both our thin super glue and thick super glue products, making it ideal for filling small gaps, penetrating narrow slots, bonding close-fitting parts, and creating high-gloss finishes on wood. This super glue wood finishing is accomplished by applying multiple coats, sanding, then polishing to a high shine! This versatile adhesive is used in woodturning, guitar repair, and pen making, to name but a few applications. Used by everyone from lapidaries to taxidermists, this glue should be kept on hand for all your small household repairs!
Professional Tip: When bonding two smooth surfaces, be sure to lightly sand, or otherwise make them scuffed or more abrasive – the glue will have more surface area to adhere to, and therefore more holding strength!
Use Starbond EM-150 Medium Super glue to:
Bond harder wood, like basswood and spruce
Treat cracked stones and gems
Bond loosely fitted soft woods and balsa joints
Build hobby models such as planes, cars, and boats
Bond RC car tires
Place and repair car trim and molding
Make pens and turn wood
Form a high-gloss polish on stones and petrified wood
Bond fiberglass to a variety of materials
Repair marble, granite, and quartz
Glue and repair guitar inlays on the body, headstock and fretboard
Work with taxidermy
For Use On:
Wood
Metal
Rubber
Leather
Ceramics
Gemstones
Rocks & Minerals
Carbon fiber
Fiberglass
PVC & Most Plastics
Starbond Super Glue Aerosol Accelerator
Starbond Super Glue Aerosol Accelerator is used to significantly speed up the drying time of cyanoacrylate super glues. Also known as a Super glue “activator”, this accelerant is solvent-based, and can be applied before and/or after the glue application. Commonly paired with slower-drying, thicker viscosity adhesives and black Super glue, Starbond Super Glue Accelerator is also helpful when priming uneven surfaces. It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time. Our aerosol cans deliver a finely compressed mist and are perfect for the infrequent user, as the acetone in the product does not escape the bottle organically. Also available as a pump spray, this accelerator cures Super glue in seconds – no more waiting!
Professional Tips:
When using higher volumes of Super glue to fill gaps, bonding times may increase – use of Starbond Super Glue Accelerator is highly recommended.
Starbond Super Glue Accelerator can also be used to enhance joint strength, when used to cure excess adhesive that results from joints being pressed together.
Uniquely formulated to dry slightly slower than other similar products on the market, Starbond Super Glue Accelerator prevents “hazing” or whitening that may occur when super glues dry too fast.
Warning: This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer. For more information, please visit: www.P65Warnings.ca.gov.
All-in-One Super Glue Bundle with Pump Controlled Precision Curing.
Bring all your bonding needs together with the ultimate adhesive bundle, designed for speed, precision, and versatility. Whether you’re looking for an ultra-fast adhesive for delicate projects or a gap-filling solution for tougher jobs, this collection has it all. Featuring "Super Fast" Thin, "Multi-Purpose" Medium, and "Gap Filler" Thick, paired with the Super Glue Pump Accelerator, this bundle gives you the perfect tools for every project. Let’s stick together and create something extraordinary with reliable adhesives trusted by professionals.
Starbond® "Super Fast" Thin
An ultra-fast drying (3-5 seconds), water-thin super glue perfect for precision bonding and stabilizing porous materials like wood, fossils, and precious stones. With a viscosity of 2-3 cps, it effortlessly wicks into tight spaces, creating strong bonds in seconds. Ideal for woodturning, lapidary, and guitar repairs, it provides a brilliant CA finish, secures inlays, and repairs cracks, voids, and knots. Perfect for hobbyists and professionals alike, its lightning-fast bonding on wood and high-energy plastics makes it a versatile and mess-free adhesive solution.
Starbond® "Multi-Purpose" Medium
A fast-drying (12-15 seconds), medium-viscosity superglue designed for strong, precise bonding across various applications. With a balanced drying time, it allows for quick repairs and detailed adjustments, making it ideal for woodturning, lapidary, and hobby modeling. This versatile adhesive creates a glass-like, UV-protective finish on wood, repairs cracks in stones and gems, and bonds 3D printed parts and delicate components with ease. Perfect for all-around use, it delivers fast results on wood, plastics, and other materials, offering a reliable solution for any project.
Starbond® "Gap Filler" Thick
A slower-drying (25 seconds), high-viscosity superglue designed for bonding uneven surfaces and filling large voids. With its thick, honey-like consistency (2000 cps), it flows naturally into gaps without dripping on angled surfaces, making it perfect for woodturning, pen making, and even glass or metal applications. This versatile adhesive provides extended working time for precise adjustments and bonds materials like wood, plastic, and metal. Ideal for repairs, model assembly, and creating unique finishes, it offers a cleaner, quicker alternative to epoxy without the need for clamping or waiting.
Starbond® Super Glue Pump Accelerator
Significantly speeds up the drying time of cyanoacrylate super glues. The pump delivers a controlled, targeted application, reducing mess and ensuring precision. Perfect for detailed projects and hard-to-bond surfaces, the pump format gives you the accuracy needed for clean, effective curing without "hazing" or whitening.
Professional Tips:
Use with Starbond® "Super Fast" Thin to prevent seepage in porous materials.
Ideal for accelerating Starbond® "Multi-Purpose" Medium for quicker bonding.
Enhances gap-filling with Starbond® "Gap Filler" Thick by speeding up curing time.
Starbond Super Fast Thin Super glue EM-02
Starbond Super Fast Thin Super glue EM-02 can’t be beat when it comes to getting into tight spaces on porous surfaces. Whether you’re working with powder inlays, ceramics, soft wood, unpolished rocks, or even fossils, our Super Fast Thin Super glue penetrates and stabilizes any crack or seam effortlessly through wicking capillary action. This watery-thin adhesive also makes a stunning super glue finish and polish, when applied as several coats, sanded in-between, and buffed to a brilliant shine.
Want to keep the hold, but prevent absorption? No problem – we have the perfect solution! Starbond Accelerator keeps our glues from seeping into porous surfaces – the instant cure for unwanted wicking!
Use Starbond Super Fast Thin Super glue EM-02 to:
Repair and fill cracks, inclusions, voids, and knots in wood
Stabilize Guitar Frets
Install bindings and purflings on stringed instruments
Glue and repair guitar inlays on the headstock, body, and fretboard
Prepare fossils by infiltrating and stabilizing the fossil before extraction
Repairing small cracks in stone
Metal and turquoise inlays
Create and repair jewelry
Refinish furniture and antiques
Repair ceramic, quartz, granite, and marble
Bond fiberglass and balsa wood
Finish woodturning and knife handles with a hard, clear, waterproof seal
Perform taxidermy
For Use On:
Wood
Metal
Rubber
Leather
Ceramics
Gemstones
Rocks & Minerals
Carbon Fiber
Most Plastic
Fiberglass
Starbond Super Glue Aerosol Accelerator
Starbond Super Glue Aerosol Accelerator is used to significantly speed up the drying time of cyanoacrylate super glues. Also known as a Super glue “activator”, this accelerant is solvent-based, and can be applied before and/or after the glue application. Commonly paired with slower-drying, thicker viscosity adhesives and black Super glue, Starbond Super Glue Accelerator is also helpful when priming uneven surfaces. It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time. Our aerosol cans deliver a finely compressed mist and are perfect for the infrequent user, as the acetone in the product does not escape the bottle organically. Also available as a pump spray, this accelerator cures Super glue in seconds – no more waiting!
Professional Tips:
When using higher volumes of Super glue to fill gaps, bonding times may increase – use of Starbond Super Glue Accelerator is highly recommended.
Starbond Super Glue Accelerator can also be used to enhance joint strength, when used to cure excess adhesive that results from joints being pressed together.
Uniquely formulated to dry slightly slower than other similar products on the market, Starbond Super Glue Accelerator prevents “hazing” or whitening that may occur when super glues dry too fast.
Warning: This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer. For more information, please visit: www.P65Warnings.ca.gov.
Precision Accelerator for Small, Delicate Work.
Starbond® Brush-On Accelerator is perfect for accelerating super glue curing in small, delicate areas where traditional accelerators might cause overspray or mess. Ideal for hobbyists, model builders, and woodworkers, this brush-on formula gives you precise control, allowing for accurate application without the risk of drips or wasted product.
Unlike traditional accelerators that may be too broad for intricate work, this brush applicator ensures a clean, controlled application exactly where it's needed. Speed up your CA super glue’s curing time to just seconds while maintaining precision. Plus, it comes with a spare brush, ensuring consistent performance, even after repeated use.
Warning: Contains heptane and is flammable; use with adequate ventilation and keep away from heat, sparks, and open flame.
2oz. Starbond Black Med-Thick CA + 8oz. Pump Accelerator Bundle
KBL-500 Starbond Black Medium-Thick CA Glue (Medium Thick)
Starbond KBL-500 Black Medium-Thick CA glue is a flexible, rubber-toughened super glue that dries jet black in color. The KBL-500 is ideal for hiding imperfections, filling dark voids, and accenting specific areas in your projects. Along with impact and shock absorbing properties, the black CA retains favorable qualities such as the ability to be sanded down and polished to a high gloss finish. Additionally, when infiltrating fractures, pores, and soft material, the adhesive is able to expand and contract with its surrounding malleable environment, preventing cracking. Starbond KBL-500 Black Medium-Thick CA glue is commonly used in reconing speakers, hobby RC car tires, woodturning inlays, burl, and spalted wood. heavy duty bonding, and filling voids.
It is important to keep in mind that the colored CA glues have an extended bonding time due to the added rubber compound. Although bonding time is generally 40-60 seconds, it can take much longer to dry when larger volumes of the colored adhesive are applied. For these instances, use of Starbond Accelerator is highly recommended.
WARNING This product can expose you to chemicals including Carbon Black and Methyl isobutyl ketone, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Used In:
Accenting designs on spalted wood
Bonding dissimilar materials such as wood, metal, glass and rubber
Creating a black accent on projects
Gluing R/C Car tires
Threadlocking in R/C cars
In speaker manufacturing, bonding top plate to frame, spider to voice coil, spider assembly to frame, spider to cone assembly, dustcap to cone, gasket to surround, surround to frame or cone, cone to coil connections, dressing lead wires to cone, and select dustcap applications.
Repairing and filling cracks, inclusions, voids, and knots in wood
Compatible With:
Wood
Metal
Rubber
Leather
Ceramics
Gemstones
Rocks & Minerals
Carbon Fiber
Fiberglass
Most Plastics
Starbond Super Glue Accelerator
Starbond Super Glue Accelerator, also known as CA glue "activator," is used to significantly increase the drying time of cyanoacrylate super glues. The CA glue accelerant is a solvent based product that can be applied before and/or after CA glue application. Starbond Super Glue Accelerator is commonly paired with thicker viscosity CA glues and black CA glue, as these adhesives take longer to dry. In addition, Starbond Super Glue Accelerator is useful when priming uneven surfaces or material combinations that are harder to bond, and in colder, drier environments where curing time may be delayed. Starbond Super Glue Accelerator comes in pump sprayer and aerosol form.
WARNING This product can expose you to chemicals including N,N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Used to cure the CA that flows from joints that are being pressed together, greatly enhancing the joints strength
When using higher volumes of CA during gap filling applications, bonding time may take much longer, so Accelerator is highly recommended
Starbond EM-2000 Thick Super Glue is known as the “gap filler’. This thick adhesive has a thick viscosity, making it the go-to glue for filling large voids and gaps, and heavy-duty bonding. With its strong bonding capabilities, EM-2000 stays in place, even when applied at an angle. This glue is specially formulated to have a longer curing time, allowing as much as two minutes for positioning and the most precise bonding.
The Twist-off nozzle bottle
The twist-off nozzle bottle is specially designed to allow faster dispensing of Starbond Thick super glue while still maintaining great precision. It also eliminates the need to cut the tip of the applicator nozzle before first use. So if you’re looking to get your craft on and need precision with your glue application, reach for the Starbond Thick super glue with the screw-off nozzle. But if you’re looking for a little bit more precision, a cylindrical bottle will do the trick (since it is compatible with Starbond microtips)!
Starbond Accelerator is perfect if you need the high degree of control from our EM-2000, but want to speed up the bonding time!
Use Starbond EM-2000 Thick Super Glue to:
Quickly repair auto body and paint
Fill large gaps and holes
Assemble plastic and metal models
Form unique finishes by carving, sanding, and feathering
Bond various kayak panels faster than with epoxy
Install cue tips onto pool cues (with recommended Starbond Accelerator)
Bond fiberglass to a variety of materials
Frag coral
Repair shoes
Repair marble, granite, and quartz
Perform taxidermy
Bond models to dental lab articulators
Temporarily repair auto bumpers
For use on:
Wood
Metal
Rubber
Leather
Ceramics
Gemstones
Rocks & Minerals
Carbon Fiber
Fiberglass
PVC & Most Plastics
Starbond Super Glue Aerosol Accelerator
Starbond Super Glue Aerosol Accelerator is used to significantly speed up the drying time of cyanoacrylate super glues. Also known as a super glue “activator”, this accelerant is solvent-based, and can be applied before and/or after the glue application. Commonly paired with slower-drying, thicker viscosity adhesives and black super glue, Starbond Super Glue Accelerator is also helpful when priming uneven surfaces. It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time. Our aerosol cans deliver a finely compressed mist and are perfect for the infrequent user, as the acetone in the product does not escape the bottle organically. Also available as a pump spray, this accelerator cures super glue in seconds – no more waiting!
Professional Tips:
When using higher volumes of super glue to fill gaps, bonding times may increase – use of Starbond Super Glue Accelerator is highly recommended.
Starbond Super Glue Accelerator can also be used to enhance joint strength, when used to cure excess adhesive that results from joints being pressed together.
Uniquely formulated to dry slightly slower than other similar products on the market, Starbond Super Glue Accelerator prevents “hazing” or whitening that may occur when super glues dry too fast.
Warning: This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer. For more information, please visit: www.P65Warnings.ca.gov.
Starbond EM-150 Medium CA Glue
Starbond EM-150 Medium CA Glue is a medium-viscosity, multi-purpose, instant adhesive. With an oil-like consistency, this glue has properties of both our thin CA and thick CA products, making it ideal for filling small gaps, penetrating narrow slots, bonding close-fitting parts, and creating high-gloss finishes on wood. This CA wood finishing is accomplished by applying multiple coats, sanding, then polishing to a high shine! This versatile adhesive is used in woodturning, guitar repair, and pen making, to name but a few applications. Used by everyone from lapidaries to taxidermists, this glue should be kept on hand for all your small household repairs!
Professional Tip: When bonding two smooth surfaces, be sure to lightly sand, or otherwise make them scuffed or more abrasive – the glue will have more surface area to adhere to, and therefore more holding strength!
Use Starbond EM-150 Medium CA Glue to:
Bond harder wood, like basswood and spruce
Treat cracked stones and gems
Bond loosely fitted soft woods and balsa joints
Build hobby models such as planes, cars, and boats
Bond RC car tires
Place and repair car trim and molding
Make pens and turn wood
Form a high-gloss polish on stones and petrified wood
Bond fiberglass to a variety of materials
Repair marble, granite, and quartz
Glue and repair guitar inlays on the body, headstock and fretboard
Work with taxidermy
For Use On:
Wood
Metal
Rubber
Leather
Ceramics
Gemstones
Rocks & Minerals
Carbon fiber
Fiberglass
PVC & Most Plastics
Starbond Super Glue Pump Accelerator
Starbond Super Glue Aerosol Accelerator is used to significantly speed up the drying time of cyanoacrylate super glues. Also known as a CA glue “activator”, this accelerant is solvent-based, and can be applied before and/or after the glue application. Commonly paired with slower-drying, thicker viscosity adhesives and black CA glue, Starbond Super Glue Accelerator is also helpful when priming uneven surfaces. It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time. Our accelerator cures CA glue in seconds – no more waiting!
Professional Tips:
When using higher volumes of CA glue to fill gaps, bonding times may increase – use of Starbond Super Glue Accelerator is highly recommended.
Starbond Super Glue Accelerator can also be used to enhance joint strength, when used to cure excess adhesive that results from joints being pressed together.
Uniquely formulated to dry slightly slower than other similar products on the market, Starbond Super Glue Accelerator prevents “hazing” or whitening that may occur when super glues dry too fast.
Warning: This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer. For more information, please visit: www.P65Warnings.ca.gov.
2 oz. Brown Medium CA Glue + 8oz. Pump Accelerator Bundle
Starbond BR-150 Brown Medium CA Glue is a brown-tinted super glue for general-purpose use and so much more! With its light amber color, there is no need to introduce sawdust to your other CA glues when filling voids! This adhesive penetrates narrow slots, bonds close-fitting parts, and fills small gaps. We recommend pairing this glue with light-colored woods, for perfect inlays, crack repairs, and sanding to a high-polish finish.
Use Starbond BR-150 Brown Medium CA Glue to:
Accent designs on spalted wood
Blend into similarly colored surfaces
Repair and fill cracks, inclusions, voids, and knots in wood
Glue and repair guitar inlays on the headstock, body, and fretboard
For Use On:
Wood
Metal
Rubber
Leather
Ceramics
Gemstones
Rocks & Minerals
Carbon Fiber
Fiberglass
Most Plastics
The Original Formula is Back: Slower Curing for Greater Control.
Starbond® Original Thin CA Glue returns to give you the versatility and precision you’ve been asking for. Designed with a slower curing time of 10-15 seconds, this water-thin adhesive is perfect for projects that demand meticulous application and seamless results. Whether you’re crafting high-gloss woodturning finishes or stabilizing delicate materials like wood and stone, the Original Thin formula delivers unparalleled control.
With its 2-3 cps viscosity, the glue wicks deeply into cracks, pores, and voids, reinforcing fragile surfaces while maintaining a flawless finish. This slower cure time allows for smooth, even coating and eliminates the risk of white hazing, making it an essential tool for woodworkers, lapidary enthusiasts, and detail-oriented crafters.
How Does It Compare to Super Fast Thin?
Super Fast Thin: With its lightning-fast 2-3 second cure time, it’s ideal for quick fixes and time-sensitive tasks.
Original Thin: Slower curing (10-15 seconds) offers better control for high-gloss coatings, stabilization, and intricate work.
Looking for even faster results?The Original Thin CA Glue takes slightly longer to bond, allowing for greater control and precision. Use Starbond® Accelerator to speed up curing times, especially for intricate or large applications.
Bonding Tip:For a stronger hold, lightly sand or scuff smooth surfaces before applying. This increases surface area and enhances adhesion.
Used For:
Creating stunning high-gloss finishes in woodturning, lapidary, and polishing projects.
Stabilizing and reinforcing porous materials like wood, stone, and fossils.
Seamlessly filling hairline cracks, pores, and voids with pinpoint accuracy.
Crafting intricate designs and details in woodworking, hobby models, and more.
Evenly coating surfaces for professional-grade results.
2 oz. Starbond “Dark Brown” Medium-Thick + 8 oz. Pump Accelerator Bundle
Starbond BR-500 Brown Medium-Thick CA Glue is for general-purpose use and so much more! With its “coffee brown” color, there is no need to introduce sawdust and coloring agents to your other CA glues when filling voids! Our BR-500 super glue is the ideal adhesive for bonding close-fitting parts, filling bug holes and knots, and concealing imperfections in wood. We also recommend pairing this glue to highlight and contrast light-colored woods, for perfect inlays, crack repairs, and sanding to a high-polish finish.
Use Starbond BR-500 Brown Medium-Thich CA Glue to:
Conceal minor imperfections in darker wood such as walnut.
Fill cracks, inclusions, voids, and knots in wood
Glue and repair in general applications
For Use On:
Wood
Metal
Rubber
Leather
Ceramics
Gemstones
Rocks & Minerals
Carbon Fiber
Fiberglass
Most Plastics
Starbond Super Fast Thin CA Glue EM-02
Starbond Super Fast Thin CA Glue EM-02 can’t be beat when it comes to getting into tight spaces on porous surfaces. Whether you’re working with powder inlays, ceramics, soft wood, unpolished rocks, or even fossils, our Super Fast Thin CA Glue penetrates and stabilizes any crack or seam effortlessly through wicking capillary action. This watery-thin adhesive also makes a stunning CA finish and polish, when applied as several coats, sanded in-between, and buffed to a brilliant shine.
Want to keep the hold, but prevent absorption? No problem – we have the perfect solution! Starbond Accelerator keeps our glues from seeping into porous surfaces – the instant cure for unwanted wicking!
Use Starbond Super Fast Thin CA Glue EM-02 to:
Repair and fill cracks, inclusions, voids, and knots in wood
Stabilize Guitar Frets
Install bindings and purflings on stringed instruments
Glue and repair guitar inlays on the headstock, body, and fretboard
Prepare fossils by infiltrating and stabilizing the fossil before extraction
Repairing small cracks in stone
Metal and turquoise inlays
Create and repair jewelry
Refinish furniture and antiques
Repair ceramic, quartz, granite, and marble
Bond fiberglass and balsa wood
Finish woodturning and knife handles with a hard, clear, waterproof seal
Perform taxidermy
For Use On:
Wood
Metal
Rubber
Leather
Ceramics
Gemstones
Rocks & Minerals
Carbon Fiber
Most Plastic
Fiberglass
Starbond Super Glue Pump Accelerator
Starbond Super Glue Pump Accelerator is used to significantly speed up the drying time of cyanoacrylate super glues. Also known as a CA glue “activator”, this accelerant is solvent-based, and can be applied before and/or after the glue application. Commonly paired with slower-drying, thicker viscosity adhesives and black CA glue, Starbond Super Glue Accelerator is also helpful when priming uneven surfaces. It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time. Our accelerator cures CA glue in seconds – no more waiting!
Professional Tips:
When using higher volumes of CA glue to fill gaps, bonding times may increase – use of Starbond Super Glue Accelerator is highly recommended.
Starbond Super Glue Accelerator can also be used to enhance joint strength, when used to cure excess adhesive that results from joints being pressed together.
Uniquely formulated to dry slightly slower than other similar products on the market, Starbond Super Glue Accelerator prevents “hazing” or whitening that may occur when super glues dry too fast.
Warning: This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer. For more information, please visit: www.P65Warnings.ca.gov.
Actually bought 2 of these in different colors and have been using them on projects lately. Very concentrated and works well with their 2 part 5 min epoxy. Will buy again. Used recently to fill areas on a cross project for Resurrection Day.
Recently bought medium knot filler kit for CNC carved sign. What a time saver. Used the fine tip to get the epoxy into the vcarved text, shot of excelerstor agent and was final sanding in 5 minutes. No bleeding of the black epoxy into the base material. Such a time savor. Will definitely be looking at more of the Starbond systems for my CNC needs. Thank you for a great product.
After fighting with super glue and fillers for a long time, I discovered Starbond. All the products work as promised. Further, the company has truly thought out the process from how to use it, how to store it, and how to make it work for an extended period. It's no longer opening a new container whenever you need a bonder or filler. They provide extra caps and applicators, which is brilliant. I love this stuff and have found no better product. I wish all providers of products had the customers' best interest in mind over simply selling more products. I applaud the management team.